In Situ Erosion Study to Investigate the Effectiveness of an Experimental Toothpaste
Primary Purpose
Tooth Erosion
Status
Completed
Phase
Phase 3
Locations
United States
Study Type
Interventional
Intervention
0.254% w/w sodium fluoride and 5% KNO3
0.454% w/w stannous fluoride
5% KNO3
Sponsored by
About this trial
This is an interventional treatment trial for Tooth Erosion
Eligibility Criteria
Inclusion Criteria:
- Evidence of a personally signed and dated informed consent.
- Male and female participants who, at the time of screening, are between the ages of 18 and 65 years, inclusive.
- Participant who is willing and able to comply with scheduled visits, treatment plan, and other study procedures.
- Good general and mental health with, in the opinion of the investigator or medically qualified designee. No clinically significant and relevant abnormalities in medical history or oral examination.
- Male participant able to father children and female participant of childbearing potential and at risk for pregnancy must agree to use a highly effective method of contraception throughout the study and for 5 days after the last dose of assigned treatment.
- Good oral health without lesions of the oral cavity that could interfere with the study evaluations.
- Maxillary dental arch suitable for the retention of the palatal appliance
- Unstimulated salivary flow rate of at least 0.2 mL/minute and a stimulated salivary flow rate of at least 0.8 mL/minute.
- Understands and is willing, able and likely to comply with all study procedures and restrictions.
Exclusion Criteria:
- Participants who are investigational site staff members directly involved in the conduct of the study and their family members, site staff members otherwise supervised by the investigator, or participants who are GSK employees directly involved in the conduct of the study.
- Participation in other studies involving investigational drug(s) within 30 days prior to screening visit.
- Participation in other studies involving investigational oral care or cosmetic products within 30 days prior to screening visit.
- Acute or chronic medical or psychiatric condition that may increase the risk associated with study participation or investigational product administration or may interfere with the interpretation of study results and, in the judgment of the investigator, would make the participant inappropriate for entry into this study.
- Pregnant female participant (self - reported).
- Breastfeeding female participant.
- Known or suspected intolerance or hypersensitivity to the study materials (or closely related compounds) or any of their stated ingredients. Unwilling or unable to comply with the lifestyle guidelines described in this protocol.
- Medication that may interfere significantly with the saliva flow in the judgment of the investigator. Should new medications that may interfere with the saliva flow be added, a second salivary flow test will be performed.
- Participant with any condition that would impact on their safety or wellbeing or affect their ability to understand and follow study procedures and requirements.
- Any sign of grossly carious lesions (active), moderate or severe periodontal conditions, or severe tooth wear. Participant presenting at screening with minor caries may continue in the study if their carious lesions are repaired prior to the first treatment visit of the study.
- Wears oral appliance or orthodontia (besides participants wearing permanent lower retainers, which are eligible).
- Recent history (within the last year) of alcohol or other substance abuse. Participant who has previously been enrolled in this study.
Sites / Locations
- GSK Investigational Site
Arms of the Study
Arm 1
Arm 2
Arm 3
Arm Type
Experimental
Active Comparator
Placebo Comparator
Arm Label
Test product
Comparator Product
Placebo Product
Arm Description
Participants will apply a full ribbon of the test product (1.5 grams [g]) containing 0.254% w/w sodium fluoride and 5% KNO3.
Participants will apply a full ribbon of the comparator product (1.5 g orally) containing 0.454% w/w stannous fluoride.
Participants will apply a full ribbon of the placebo (1.5 g orally) containing 5% KNO3.
Outcomes
Primary Outcome Measures
% Surface Micro Hardness Recovery (SMHR; Comparison of 1150 Ppm Fluoride and 5% KNO3 Dentifrice Relative to a Fluoride Free Placebo Dentifrice to Enhance Remineralization of Enamel)
The %SMHR was calculated to assess the changes in mineralization status of enamel specimens. The mean indent length (micrometer) from five Knoop microindentations within each specimen was measured at baseline (B), after the first erosive challenge (E1), and after 2 and 4 hours intraoral phase (R). An increase in the indentation length compared to the baseline indicates softening of the enamel surface while decrease in the indentation length represents re-hardening of enamel surface. The %SMHR was calculated as : %SMHR = [(E1-R)/(E1-B)]*100. Greater values of %SMHR indicate that greater remineralization has occurred, thus higher values are more favorable.
Secondary Outcome Measures
% Relative Erosion Resistance (RER; Comparison of 1150 Ppm Fluoride and 5% KNO3 Dentifrice Relative to a Fluoride Free Placebo Dentifrice to Inhibit Demineralization of Enamel)
The %RER was calculated to assess the ability of treated enamel specimens to provide a combined benefit in terms of enhanced remineralization and acid resistance of the enamel. The mean indent length (micrometer) from five Knoop microindentations within each specimen was measured at baseline (B), after the first erosive challenge (E1), and after the second erosive challenge (E2) (E2 is measured for after both 2 and 4 hours of remineralization). An increase in the indentation length compared to the baseline indicates softening of the enamel surface while decrease in the indentation length represents re-hardening of enamel surface. The %RER was calculated as : %RER = [(E1-E2)/ (E1-B)]*100. Higher values of %RER indicate greater resistance to erosion, thus higher values are more favorable.
Enamel Fluoride Uptake (EFU; Comparison of 1150 Ppm Fluoride and 5% KNO3 Dentifrice Relative to a Fluoride Free Placebo Dentifrice to Promote Fluoride Uptake in Enamel)
The EFU was measured to determine the amount of fluoride incorporation into the model erosive lesions. Each enamel specimen drilled to a depth of approximately 100 μm using a microdrill, through the entire lesion (four cores per specimen). The enamel powder pooled from four drilling samples was then, dissolved in a known volume of perchloric acid and immediately analyzed for fluoride content using a calibrated fluoride specific electrode. The amount of fluoride-uptake by enamel was calculated based on the amount of fluoride divided by the area of the enamel cores and expressed as microgram fluoride per square centimeter (μgF/cm^2). Higher values of EFU indicate greater incorporation of fluoride into the enamel and are thus more favorable.
% SMHR (Comparison of 1150 Ppm Fluoride and 5% KNO3 Dentifrice Relative to Comparator Containing 1100 Ppm Fluoride)
The %SMHR was calculated to assess the changes in mineralization status of enamel specimens. The mean indent length (micrometer) from five Knoop microindentations within each specimen was measured at baseline (B), after the first erosive challenge (E1), and after 2 and 4 hours intraoral phase (R). An increase in the indentation length compared to the baseline indicates softening of the enamel surface while decrease in the indentation length represents re-hardening of enamel surface. The %SMHR was calculated as: %SMHR = [(E1-R)/(E1-B)]*100. Greater values of %SMHR indicate that greater remineralization has occurred, thus higher values are more favorable.
% RER (Comparison of 1150 Ppm Fluoride and 5% KNO3 Dentifrice Relative to Comparator Containing 1100 Ppm Fluoride)
The %RER was calculated to assess the ability of treated enamel specimens to provide a combined benefit in terms of enhanced remineralization and acid resistance of the enamel. The mean indent length (micrometer) from five Knoop microindentations within each specimen was measured at baseline (B), after the first erosive challenge (E1), and after the second erosive challenge (E2) (E2 is measured for after both 2 and 4 hours of remineralization). An increase in the indentation length compared to the baseline indicates softening of the enamel surface while decrease in the indentation length represents re-hardening of enamel surface. The %RER was calculated as : %RER = [(E1-E2)/ (E1-B)]*100. Higher values of %RER indicate greater resistance to erosion, thus higher values are more favorable.
EFU (Comparison of 1150 Ppm Fluoride and 5% KNO3 Dentifrice Relative to Comparator Containing 1100 Ppm Fluoride)
The EFU was measured to determine the amount of fluoride incorporation into the model erosive lesions. Each enamel specimen drilled to a depth of approximately 100 μm using a microdrill, through the entire lesion (four cores per specimen). The enamel powder pooled from four drilling samples was then, dissolved in a known volume of perchloric acid and immediately analyzed for fluoride content using a calibrated fluoride specific electrode. The amount of fluoride-uptake by enamel was calculated based on the amount of fluoride divided by the area of the enamel cores and expressed as microgram fluoride per square centimeter (μgF/cm^2). Higher values of EFU indicate greater incorporation of fluoride into the enamel and are thus more favorable.
Full Information
1. Study Identification
Unique Protocol Identification Number
NCT03296072
Brief Title
In Situ Erosion Study to Investigate the Effectiveness of an Experimental Toothpaste
Official Title
A Randomized, Examiner Blind, Crossover, in Situ Erosion Study to Investigate the Efficacy of an Experimental Dentifrice in Remineralization of Previously Softened Enamel Compared to a Placebo Dentifrice
Study Type
Interventional
2. Study Status
Record Verification Date
August 2020
Overall Recruitment Status
Completed
Study Start Date
November 13, 2017 (Actual)
Primary Completion Date
January 16, 2018 (Actual)
Study Completion Date
January 16, 2018 (Actual)
3. Sponsor/Collaborators
Responsible Party, by Official Title
Sponsor
Name of the Sponsor
GlaxoSmithKline
4. Oversight
Studies a U.S. FDA-regulated Drug Product
Yes
Studies a U.S. FDA-regulated Device Product
No
5. Study Description
Brief Summary
This will be a randomized, controlled, single center, single- blind, 3 period, 3 treatment, cross-over, in situ design which consists of placing pre-eroded bovine enamel specimens intra orally using a palatal appliance and testing the remineralizing performance of the experimental (dentifrice containing 0.254 Percent weight by weight [%, w/w] sodium fluoride (1150 parts per million [ppm] fluoride) and 5% KNO3 [potassium nitrate]), comparator (dentifrice containing 0.454% w/w stannous fluoride (1100 ppm fluoride) and placebo (Fluoride free placebo containing 5% KNO3 [0 ppm fluoride] ) dentifrices 2 and 4 hours (hrs) post treatment application, based on surface micro hardness measurements. This study will be carried out in healthy adults with a maxillary dental arch suitable for the retention of the palatal appliance.
Detailed Description
The aim of this study is to investigate the performance of an experimental dentifrice formulation in promoting enamel remineralization and inhibiting post-treatment enamel demineralization in an in situ erosion model, in comparison with a fluoride-free placebo and with a marketed competitor dentifrice product. The study will have 4 visits, 1 screening visit to assess participants eligibility and 3 treatment visits to assess product efficacy, where the treatment product will be dispensed and used under the supervision of a suitably trained study site personnel. Prior to each treatment visit, there will be a washout period of a minimum of 3 days. During this period participants will use their own dentifrice for at least one day, and a fluoride free dentifrice (provided) for two days prior to the next scheduled visit (including in the morning of the scheduled visit) to minimize any carry-over effects of the fluoride toothpaste.
6. Conditions and Keywords
Primary Disease or Condition Being Studied in the Trial, or the Focus of the Study
Tooth Erosion
7. Study Design
Primary Purpose
Treatment
Study Phase
Phase 3
Interventional Study Model
Crossover Assignment
Masking
InvestigatorOutcomes Assessor
Masking Description
Laboratory sample analyst will be blinded to treatment received. All study products will be overwrapped to conceal any labelling.
The dispensing staff will not be involved in any clinical assessments or laboratory analysis during the study. Dental examiner will also be blinded to the treatment received.
Allocation
Randomized
Enrollment
62 (Actual)
8. Arms, Groups, and Interventions
Arm Title
Test product
Arm Type
Experimental
Arm Description
Participants will apply a full ribbon of the test product (1.5 grams [g]) containing 0.254% w/w sodium fluoride and 5% KNO3.
Arm Title
Comparator Product
Arm Type
Active Comparator
Arm Description
Participants will apply a full ribbon of the comparator product (1.5 g orally) containing 0.454% w/w stannous fluoride.
Arm Title
Placebo Product
Arm Type
Placebo Comparator
Arm Description
Participants will apply a full ribbon of the placebo (1.5 g orally) containing 5% KNO3.
Intervention Type
Drug
Intervention Name(s)
0.254% w/w sodium fluoride and 5% KNO3
Intervention Description
Dentifrice containing 0.254% w/w sodium fluoride (1150 ppm fluoride) and 5% KNO3; plus 0.25% PVM/MA copolymer and 2.5% sodium lactate. Participants will brush it on the buccal surfaces of their natural teeth for 25 timed seconds and then swish the resulting toothpaste slurry around the mouth, without further brushing, for a timed period of 95 seconds. After expectorating the slurry, the participants will gently rinse their mouths with 15 millilitres [mL] of tap water for 10 seconds before expectorating again.
Intervention Type
Drug
Intervention Name(s)
0.454% w/w stannous fluoride
Intervention Description
Dentifrice containing 0.454% w/w stannous fluoride (1100 ppm fluoride). Participants will brush it on the buccal surfaces of their natural teeth for 25 timed seconds and then swish the resulting toothpaste slurry around the mouth, without further brushing, for a timed period of 95 seconds. After expectorating the slurry, the participants will gently rinse their mouths with 15 mL of tap water for 10 seconds before expectorating again.
Intervention Type
Drug
Intervention Name(s)
5% KNO3
Intervention Description
Fluoride free placebo dentifrice containing 5% KNO3 (0 ppm fluoride), 0.25% PVM/MA copolymer and 2.5% lactate. Participants will brush it on the buccal surfaces of their natural teeth for 25 timed seconds and then swish the resulting toothpaste slurry around the mouth, without further brushing, for a timed period of 95 seconds. After expectorating the slurry, the participants will gently rinse their mouths with 15 mL of tap water for 10 seconds before expectorating again.
Primary Outcome Measure Information:
Title
% Surface Micro Hardness Recovery (SMHR; Comparison of 1150 Ppm Fluoride and 5% KNO3 Dentifrice Relative to a Fluoride Free Placebo Dentifrice to Enhance Remineralization of Enamel)
Description
The %SMHR was calculated to assess the changes in mineralization status of enamel specimens. The mean indent length (micrometer) from five Knoop microindentations within each specimen was measured at baseline (B), after the first erosive challenge (E1), and after 2 and 4 hours intraoral phase (R). An increase in the indentation length compared to the baseline indicates softening of the enamel surface while decrease in the indentation length represents re-hardening of enamel surface. The %SMHR was calculated as : %SMHR = [(E1-R)/(E1-B)]*100. Greater values of %SMHR indicate that greater remineralization has occurred, thus higher values are more favorable.
Time Frame
After 4 hrs following single exposure of treatment
Secondary Outcome Measure Information:
Title
% Relative Erosion Resistance (RER; Comparison of 1150 Ppm Fluoride and 5% KNO3 Dentifrice Relative to a Fluoride Free Placebo Dentifrice to Inhibit Demineralization of Enamel)
Description
The %RER was calculated to assess the ability of treated enamel specimens to provide a combined benefit in terms of enhanced remineralization and acid resistance of the enamel. The mean indent length (micrometer) from five Knoop microindentations within each specimen was measured at baseline (B), after the first erosive challenge (E1), and after the second erosive challenge (E2) (E2 is measured for after both 2 and 4 hours of remineralization). An increase in the indentation length compared to the baseline indicates softening of the enamel surface while decrease in the indentation length represents re-hardening of enamel surface. The %RER was calculated as : %RER = [(E1-E2)/ (E1-B)]*100. Higher values of %RER indicate greater resistance to erosion, thus higher values are more favorable.
Time Frame
After 4 hrs following single exposure of treatment
Title
Enamel Fluoride Uptake (EFU; Comparison of 1150 Ppm Fluoride and 5% KNO3 Dentifrice Relative to a Fluoride Free Placebo Dentifrice to Promote Fluoride Uptake in Enamel)
Description
The EFU was measured to determine the amount of fluoride incorporation into the model erosive lesions. Each enamel specimen drilled to a depth of approximately 100 μm using a microdrill, through the entire lesion (four cores per specimen). The enamel powder pooled from four drilling samples was then, dissolved in a known volume of perchloric acid and immediately analyzed for fluoride content using a calibrated fluoride specific electrode. The amount of fluoride-uptake by enamel was calculated based on the amount of fluoride divided by the area of the enamel cores and expressed as microgram fluoride per square centimeter (μgF/cm^2). Higher values of EFU indicate greater incorporation of fluoride into the enamel and are thus more favorable.
Time Frame
After 4 hrs following single exposure of treatment
Title
% SMHR (Comparison of 1150 Ppm Fluoride and 5% KNO3 Dentifrice Relative to Comparator Containing 1100 Ppm Fluoride)
Description
The %SMHR was calculated to assess the changes in mineralization status of enamel specimens. The mean indent length (micrometer) from five Knoop microindentations within each specimen was measured at baseline (B), after the first erosive challenge (E1), and after 2 and 4 hours intraoral phase (R). An increase in the indentation length compared to the baseline indicates softening of the enamel surface while decrease in the indentation length represents re-hardening of enamel surface. The %SMHR was calculated as: %SMHR = [(E1-R)/(E1-B)]*100. Greater values of %SMHR indicate that greater remineralization has occurred, thus higher values are more favorable.
Time Frame
After 4 hrs following single exposure of treatment
Title
% RER (Comparison of 1150 Ppm Fluoride and 5% KNO3 Dentifrice Relative to Comparator Containing 1100 Ppm Fluoride)
Description
The %RER was calculated to assess the ability of treated enamel specimens to provide a combined benefit in terms of enhanced remineralization and acid resistance of the enamel. The mean indent length (micrometer) from five Knoop microindentations within each specimen was measured at baseline (B), after the first erosive challenge (E1), and after the second erosive challenge (E2) (E2 is measured for after both 2 and 4 hours of remineralization). An increase in the indentation length compared to the baseline indicates softening of the enamel surface while decrease in the indentation length represents re-hardening of enamel surface. The %RER was calculated as : %RER = [(E1-E2)/ (E1-B)]*100. Higher values of %RER indicate greater resistance to erosion, thus higher values are more favorable.
Time Frame
After 4 hrs following single exposure of treatment
Title
EFU (Comparison of 1150 Ppm Fluoride and 5% KNO3 Dentifrice Relative to Comparator Containing 1100 Ppm Fluoride)
Description
The EFU was measured to determine the amount of fluoride incorporation into the model erosive lesions. Each enamel specimen drilled to a depth of approximately 100 μm using a microdrill, through the entire lesion (four cores per specimen). The enamel powder pooled from four drilling samples was then, dissolved in a known volume of perchloric acid and immediately analyzed for fluoride content using a calibrated fluoride specific electrode. The amount of fluoride-uptake by enamel was calculated based on the amount of fluoride divided by the area of the enamel cores and expressed as microgram fluoride per square centimeter (μgF/cm^2). Higher values of EFU indicate greater incorporation of fluoride into the enamel and are thus more favorable.
Time Frame
After 4 hrs following single exposure of treatment
10. Eligibility
Sex
All
Minimum Age & Unit of Time
18 Years
Maximum Age & Unit of Time
65 Years
Accepts Healthy Volunteers
Accepts Healthy Volunteers
Eligibility Criteria
Inclusion Criteria:
Evidence of a personally signed and dated informed consent.
Male and female participants who, at the time of screening, are between the ages of 18 and 65 years, inclusive.
Participant who is willing and able to comply with scheduled visits, treatment plan, and other study procedures.
Good general and mental health with, in the opinion of the investigator or medically qualified designee. No clinically significant and relevant abnormalities in medical history or oral examination.
Male participant able to father children and female participant of childbearing potential and at risk for pregnancy must agree to use a highly effective method of contraception throughout the study and for 5 days after the last dose of assigned treatment.
Good oral health without lesions of the oral cavity that could interfere with the study evaluations.
Maxillary dental arch suitable for the retention of the palatal appliance
Unstimulated salivary flow rate of at least 0.2 mL/minute and a stimulated salivary flow rate of at least 0.8 mL/minute.
Understands and is willing, able and likely to comply with all study procedures and restrictions.
Exclusion Criteria:
Participants who are investigational site staff members directly involved in the conduct of the study and their family members, site staff members otherwise supervised by the investigator, or participants who are GSK employees directly involved in the conduct of the study.
Participation in other studies involving investigational drug(s) within 30 days prior to screening visit.
Participation in other studies involving investigational oral care or cosmetic products within 30 days prior to screening visit.
Acute or chronic medical or psychiatric condition that may increase the risk associated with study participation or investigational product administration or may interfere with the interpretation of study results and, in the judgment of the investigator, would make the participant inappropriate for entry into this study.
Pregnant female participant (self - reported).
Breastfeeding female participant.
Known or suspected intolerance or hypersensitivity to the study materials (or closely related compounds) or any of their stated ingredients. Unwilling or unable to comply with the lifestyle guidelines described in this protocol.
Medication that may interfere significantly with the saliva flow in the judgment of the investigator. Should new medications that may interfere with the saliva flow be added, a second salivary flow test will be performed.
Participant with any condition that would impact on their safety or wellbeing or affect their ability to understand and follow study procedures and requirements.
Any sign of grossly carious lesions (active), moderate or severe periodontal conditions, or severe tooth wear. Participant presenting at screening with minor caries may continue in the study if their carious lesions are repaired prior to the first treatment visit of the study.
Wears oral appliance or orthodontia (besides participants wearing permanent lower retainers, which are eligible).
Recent history (within the last year) of alcohol or other substance abuse. Participant who has previously been enrolled in this study.
Overall Study Officials:
First Name & Middle Initial & Last Name & Degree
GSK Clinical Trials
Organizational Affiliation
GlaxoSmithKline
Official's Role
Study Director
Facility Information:
Facility Name
GSK Investigational Site
City
Indianapolis
State/Province
Indiana
ZIP/Postal Code
46202
Country
United States
12. IPD Sharing Statement
Plan to Share IPD
Yes
IPD Sharing Plan Description
IPD for this study will be made available via the Clinical Study Data Request site.
IPD Sharing Time Frame
IPD is available via the Clinical Study Data Request site (click on the link provided below)
IPD Sharing Access Criteria
Access is provided after a research proposal is submitted and has received approval from the Independent Review Panel and after a Data Sharing Agreement is in place. Access is provided for an initial period of 12 months but an extension can be granted, when justified, for up to another 12 months.
IPD Sharing URL
https://clinicalstudydatarequest.com/Posting.aspx?ID=20365
Citations:
PubMed Identifier
32303206
Citation
Creeth JE, Burnett GR, Souverain A, Gomez-Pereira P, Zero DT, Lippert F, Hara AT. In situ efficacy of an experimental toothpaste on enamel rehardening and prevention of demineralisation: a randomised, controlled trial. BMC Oral Health. 2020 Apr 17;20(1):118. doi: 10.1186/s12903-020-01081-y.
Results Reference
derived
Links:
URL
https://filehosting-v2.pharmacm.com/api/Attachment/Download?tenantId=80217381&parentIdentifier=208166&attachmentIdentifier=2023405a-a4d3-4a83-81a3-646cce348c22&fileName=gsk-208166-protocol-redact.pdf&versionIdentifier=
Description
Related Info
URL
https://filehosting-v2.pharmacm.com/api/Attachment/Download?tenantId=80217381&parentIdentifier=208166&attachmentIdentifier=6d21b0dc-6a7f-469f-9dd7-40aeb2f0005d&fileName=gsk-208166-reporting-and-analysis-plan-redact.pdf&versionIdentifier=
Description
Related Info
Learn more about this trial
In Situ Erosion Study to Investigate the Effectiveness of an Experimental Toothpaste
We'll reach out to this number within 24 hrs