High-flow Nasal Cannula vs. Helmet PSV vs. Helmet CPAP During Respiratory Failure (HIGHFLOWHELMET)
Respiratory Failure, Hypoxemia
About this trial
This is an interventional treatment trial for Respiratory Failure
Eligibility Criteria
Inclusion Criteria:
Patients: adult hypoxemic non-hypercapnic patients admitted to the emergency department or the ICU with de novo acute respiratory failure will be assessed for the enrolment.
Patients will be considered eligible whether all the following inclusion criteria are met:
- Respiratory rate>25 bpm.
- PaO2/FiO2 ≤200 in the supine position, measured after 15 minutes of high flow treatment with face mask (60 l/min, temperature of the humidification chamber set at 37°C, FiO2 set to achieve a SpO2 >92% and <98%). Given the use of the high flows, nominal FiO2 will be considered a reliable estimate of the actual one.
- PaCO2 <45mmHg
- Absence of history of chronic respiratory failure or moderate to severe cardiac insufficiency.
- Written informed consent
Exclusion Criteria:
- Exacerbation of asthma or chronic obstructive pulmonary disease;
- Cardiogenic pulmonary oedema;
- Haemodynamic instability (Systolic blood pressure <90 mmHg or mean arterial pressure <65 mmHg) and/or lactic acidosis (lactate >5 mmol/L) and/or clinically diagnosed Shock
- Metabolic Acidosis (pH <7.30 with normal- or hypo-carbia);
- Glasgow coma scale <13;
- Recent head surgery or anatomy that prevent the application of helmet or nasal cannula to patient's face.
Sites / Locations
- Fondazione Policlinico Universitaro A. Gemelli IRCCS
Arms of the Study
Arm 1
Arm 2
Arm 3
Experimental
Experimental
Experimental
High-flow oxygen therapy
Helmet PSV
Helmet CPAP
Nasal high flow oxygen therapy will be delivered with the Optiflow system. Initial set flow will be ≥ 50 /min and flows will be decreased in case of intolerance and/or according to patients' requirements: flows≥30 L/min will be mandatory in all enrolled patients. Humidification chamber (MR860, Fisher and Paykel healthcare, New Zealand) will be set at 37 °C or 34 °C according to patient's comfort33. FiO2 will be titrated to obtain an SpO2≥92% and ≤98%.
Dedicated helmets for noninvasive ventilation will be used and size will be chosen according to neck circumference or according to manufacturer recommendations. Each patient will be connected to a compressed-gas based ventilator through a bitube circuit with no humidification. The ventilator will be set in PSV, with the following suggested settings 34-38: initial pressure support≥8-10 cmH2O and adequate to permit of a peak in the inspiratory flow of 100 l/min; positive end-expiratory pressure=10-12 cmH2O and increased to achieve the oxygenation target according to the choice of the attending physician. FiO2 will be titrated to obtain an SpO2≥92% and ≤98%. Inspiratory flow trigger = 1 l/min or according to the practice of each institution; fastest pressurization time; expiratory trigger: 10-50% of the maximum inspiratory flow; maximum inspiratory time 1.2 second.
Dedicated helmets for noninvasive ventilation will be uses and size will be chosen according to neck circumference or according to manufacturer recommendations. Treatment will be delivered through a high-flow generator. The following settings will be applied: Continuous air flow=50-60 L/min. Expiratory positive end-expiratory pressure valve set to achieve a PEEP==10-12 cmH2O and eventually increased to achieve the oxygenation target according to the choice of the attending physician. FiO2 will be titrated to obtain an SpO2≥92% and ≤98%. Pressure inside the helmet will be monitored with a manometer in order to maintain the set PEEP.