search
Back to results

A Pilot Study of the Utility of 3D Printed Masks for ALS Subjects

Primary Purpose

Amyotrophic Lateral Sclerosis

Status
Terminated
Phase
Not Applicable
Locations
United States
Study Type
Interventional
Intervention
Custom Mask Interface
Sponsored by
University of Michigan
About
Eligibility
Locations
Arms
Outcomes
Full info

About this trial

This is an interventional device feasibility trial for Amyotrophic Lateral Sclerosis focused on measuring amyotrophic lateral sclerosis, non-invasive ventilation, mask, custom, 3D-printing

Eligibility Criteria

18 Years - undefined (Adult, Older Adult)All SexesDoes not accept healthy volunteers

Inclusion Criteria:

  1. Age greater than 18
  2. Ability to communicate in English
  3. Diagnosis of ALS
  4. Subject followed in the ALS Clinic at University of Michigan
  5. Current use of NIV.
  6. Problematic mask leak defined as one of the following:

    A. A clinical complaint of mask leak impeding use of PAP AND PAP use <6 hours per night AND/OR B. Average percentage of the night in large leak on download of >10% (AVAPS)

  7. At least 1 month of NIV use

Exclusion Criteria:

  1. Subjects successfully using a commercially available mask without objective or subjective leak with good compliance (average use >6 hours per night)
  2. Silicone allergy

Sites / Locations

  • Michigan Medicine

Arms of the Study

Arm 1

Arm Type

Experimental

Arm Label

Custom Mask Interface

Arm Description

Patients use a custom mask interface for one month with an option to use for a year if it performs better than a commercial mask.

Outcomes

Primary Outcome Measures

Average number of hours the custom NIV mask interface is used per night
Average number of hours the custom NIV mask interface is used per night
Leak parameters from device
Average minutes in large leak or leak measured from the device in liters per minute and averaged over the month
Tidal volume measurements
(average measured tidal volume/average set tidal volume)*100%

Secondary Outcome Measures

Interviews with subjects regarding their experience with the custom mask Qualitative assessment of custom NIV mask efficacy
Interviews with subjects regarding their experience with the custom mask

Full Information

First Posted
April 16, 2018
Last Updated
April 5, 2021
Sponsor
University of Michigan
Collaborators
ALS Association
search

1. Study Identification

Unique Protocol Identification Number
NCT03519880
Brief Title
A Pilot Study of the Utility of 3D Printed Masks for ALS Subjects
Official Title
A Pilot Study of the Utility of 3D Printed Masks for ALS Subjects
Study Type
Interventional

2. Study Status

Record Verification Date
April 2021
Overall Recruitment Status
Terminated
Why Stopped
COVID-19 research restrictions
Study Start Date
March 14, 2017 (Actual)
Primary Completion Date
March 14, 2020 (Actual)
Study Completion Date
March 14, 2020 (Actual)

3. Sponsor/Collaborators

Responsible Party, by Official Title
Principal Investigator
Name of the Sponsor
University of Michigan
Collaborators
ALS Association

4. Oversight

Studies a U.S. FDA-regulated Drug Product
No
Studies a U.S. FDA-regulated Device Product
No
Data Monitoring Committee
No

5. Study Description

Brief Summary
Non-invasive ventilation (NIV) is an important therapy for patients with a number of neurological diseases. Specifically, NIV has been shown to be an effective treatment for people with amyotrophic lateral sclerosis (ALS, also known as Lou Gehrig's disease), which is a fatal, non-curable, progressive disease of the motor neurons. However, due to changes in facial structure associated with the disease, many ALS patients find that traditional NIV masks don't fit well. In this study, investigators will perform a feasibility study on NIV mask interfaces which are custom designed for each ALS patient and then manufactured via 3D printing.
Detailed Description
Non-invasive ventilation (NIV) is an important therapy for patients with a number of neurological diseases. Specifically, for amyotrophic lateral sclerosis (ALS)--a fatal, non-curable, progressive disease of the motor neurons--NIV represents one of the most effective treatments with a survival benefit of greater than 1 year. Despite this survival advantage, and the corresponding improvement in Quality of Life (QoL), compliance with NIV can be poor. Factors contributing to poor compliance to NIV include bulbar onset disease and mask leaks. In addition to reduced adherence to therapy, elevated mask leaks can compromise the pressure adjustment algorithm in average volume assured pressure support (AVAPS) ventilation, a commonly used mode of bilevel (positive airway pressure) PAP therapy in ALS. In an effort to increase NIV compliance in subjects with neurological conditions, and specifically ALS, investigators hypothesize that a better fit achieved through 3D printed NIV mask interfaces may improve utilization by decreasing mask leaks, decreasing the required delivery pressures and improving compliance with therapy. Investigators therefore propose a feasibility study to investigate the use of 3D printing to manufacture customized NIV mask interfaces for subjects with ALS who encounter difficulty using NIV because of poorly fitting mask interfaces despite exhausting available commercial mask options.

6. Conditions and Keywords

Primary Disease or Condition Being Studied in the Trial, or the Focus of the Study
Amyotrophic Lateral Sclerosis
Keywords
amyotrophic lateral sclerosis, non-invasive ventilation, mask, custom, 3D-printing

7. Study Design

Primary Purpose
Device Feasibility
Study Phase
Not Applicable
Interventional Study Model
Single Group Assignment
Model Description
All trial enrollees will receive the custom-designed 3D printed non-invasive ventilation mask interface.
Masking
None (Open Label)
Masking Description
There is no masking.
Allocation
N/A
Enrollment
5 (Actual)

8. Arms, Groups, and Interventions

Arm Title
Custom Mask Interface
Arm Type
Experimental
Arm Description
Patients use a custom mask interface for one month with an option to use for a year if it performs better than a commercial mask.
Intervention Type
Device
Intervention Name(s)
Custom Mask Interface
Intervention Description
Subjects enrolled in the study will received a custom designed, 3D printed, non-invasive ventilation mask interface.
Primary Outcome Measure Information:
Title
Average number of hours the custom NIV mask interface is used per night
Description
Average number of hours the custom NIV mask interface is used per night
Time Frame
1 month
Title
Leak parameters from device
Description
Average minutes in large leak or leak measured from the device in liters per minute and averaged over the month
Time Frame
1 month
Title
Tidal volume measurements
Description
(average measured tidal volume/average set tidal volume)*100%
Time Frame
1 month
Secondary Outcome Measure Information:
Title
Interviews with subjects regarding their experience with the custom mask Qualitative assessment of custom NIV mask efficacy
Description
Interviews with subjects regarding their experience with the custom mask
Time Frame
1 month
Other Pre-specified Outcome Measures:
Title
ALS Depression Inventory-12 (ADI-12)
Description
Depression Scale. Scales: For each question, the following is selected: "I fully agree", "I agree", "I don't agree", "I do not agree at all"
Time Frame
1 month
Title
ALS Functional Rating Scale, Revised (ALSFRS-R)
Description
Functional Rating Scale. Scales: Customized for each question, but 4 is the maximum and generally means 'normal', and 0 represents significant impairment.
Time Frame
1 month
Title
ALS Specific Quality of Life-20 (ALSSQOL20)
Description
Quality of Life Scale. Scales: For each question, 1-10 is selected, where 10 means "extremely" and 0 means "not at all".
Time Frame
1 month
Title
Epworth Sleepiness Scale (ESS)
Description
Sleepiness Scale. Scales: 3 means "high chance of dozing", 2 means "moderate chance of dozing", 1 means "slight chance of dozing", and 0 means "would never doze".
Time Frame
1 month
Title
PROMIS Neuro-Quality of Life Fatigue Scale
Description
Fatigue Scale. Scales: For each question, "Always" (5), "Often" (4), "Sometimes" (3), "Rarely" (2), and "Never" (1) is selected.
Time Frame
1 month
Title
PROMIS Neuro-Quality of Life Sleep Disturbance Scale
Description
Sleep Disturbance Scale. Scales: For each question, "Always" (5), "Often" (4), "Sometimes" (3), "Rarely" (2), and "Never" (1) is selected.
Time Frame
1 month

10. Eligibility

Sex
All
Minimum Age & Unit of Time
18 Years
Accepts Healthy Volunteers
No
Eligibility Criteria
Inclusion Criteria: Age greater than 18 Ability to communicate in English Diagnosis of ALS Subject followed in the ALS Clinic at University of Michigan Current use of NIV. Problematic mask leak defined as one of the following: A. A clinical complaint of mask leak impeding use of PAP AND PAP use <6 hours per night AND/OR B. Average percentage of the night in large leak on download of >10% (AVAPS) At least 1 month of NIV use Exclusion Criteria: Subjects successfully using a commercially available mask without objective or subjective leak with good compliance (average use >6 hours per night) Silicone allergy
Overall Study Officials:
First Name & Middle Initial & Last Name & Degree
Stephen A Goutman, MD
Organizational Affiliation
University of Michigan
Official's Role
Principal Investigator
Facility Information:
Facility Name
Michigan Medicine
City
Ann Arbor
State/Province
Michigan
ZIP/Postal Code
48109
Country
United States

12. IPD Sharing Statement

Plan to Share IPD
No

Learn more about this trial

A Pilot Study of the Utility of 3D Printed Masks for ALS Subjects

We'll reach out to this number within 24 hrs