Maximum Serum Concentration (Cmax) of Pembrolizumab for Cycle 1: Parts A, B, C, D, and E
Cmax was the maximum observed concentration of pembrolizumab in serum. For Part A, samples were collected on Day 1 at pre-dose, post-dose (to +30 min), 6 hour (hr) (±30 min), and 24hr; Days 2, 3, 8, 15, and 22 (±2 hr for Day 2 to Day 22) after completion of infusion. For Parts B, C, and E, samples were collected on Day 1 at pre-dose, post-dose (to +30 min), and 24hr; Day 5 (96hr was preferred, 72hr or 120hr were also acceptable, ±2 hr), and Day 15 (±24 hr) after completion of infusion. For Part D, samples were collected on Day 1 at pre-dose, post-dose (to +30 min), and 24hr; Day 5 (96hr was preferred, 72hr or 120hr were also acceptable, ±2 hr), Day 15, and Day 22 (±24 hr) after completion of infusion. Cycle 1 length for Part A was 28 days. Cycle 1 length for Parts B, C, and E was 21 days. Cycle 1 length for Part D was 42 days. Cmax is reported as geometric mean with a percent coefficient of variation. Per protocol, analysis for Cmax was planned for Parts A, B, C, D, and E.
Maximum Serum Concentration (Cmax) of Pembrolizumab for Cycle 2: Part A
Cmax was the maximum observed concentration of pembrolizumab in serum. Blood sampling was taken for Part A on Day 1 of Cycle 2 at pre-dose and 0-30 minutes post-dose. Cycle 2 length for Part A was 14 days. Cmax is reported as geometric mean with a percent coefficient of variation (%CV). Per protocol, analysis for Cmax in Cycle 2 was only planned for Part A.
Maximum Serum Concentration (Cmax) of Pembrolizumab for Cycle 4: Parts A and D
Cmax was the maximum observed concentration of pembrolizumab in serum. Blood sampling was taken for Part A on Day 1 of Cycle 4 at pre-dose and 0-30 minutes post-dose and for Part D on Day 22 of Cycle 4 at pre-dose (Day 1 of the following cycle prior to pembrolizumab infusion) and 0-30 minutes post-dose. Cycle 4 length for Part A was 14 days. Cycle 4 length for Part D was 42 days. Cmax is reported as geometric mean with a percent coefficient of variation (%CV). Per protocol, analysis for Cmax in Cycle 4 was only planned for Parts A and D.
Maximum Serum Concentration (Cmax) of Pembrolizumab for Cycle 6: Part A
Cmax was the maximum observed concentration of pembrolizumab in serum. Blood sampling was taken for Part A on Day 1 of Cycle 6 at pre-dose and 0-30 minutes post-dose. Cycle 6 length for Part A was 14 days. Cmax is reported as geometric mean with a percent coefficient of variation (%CV). Per protocol, analysis for Cmax in Cycle 6 was only planned for Part A.
Maximum Serum Concentration (Cmax) of Pembrolizumab for Cycle 8: Parts A, B, C, and E
Cmax was the maximum observed concentration of pembrolizumab in serum. Blood sampling was taken for Parts A, B, C and E on Day 1 of Cycle 8 at pre-dose and 0-30 minutes post-dose. Cycle 8 length for Part A was 14 days. Cycle 8 length for Parts B, C, and E was 21 days. Cmax is reported as geometric mean with a percent coefficient of variation (%CV). Per protocol, analysis for Cmax in Cycle 8 was only planned for Parts A, B, C, and E.
Maximum Serum Concentration (Cmax) of Pembrolizumab for Cycle 10: Part A
Cmax was the maximum observed concentration of pembrolizumab in serum. Blood sampling was taken for Part A on Day 1 of Cycle 10 at pre-dose and 0-30 minutes post-dose. Cycle 10 length for Part A was 14 days. Cmax is reported as geometric mean with a percent coefficient of variation (%CV). Per protocol, analysis for Cmax in Cycle 10 was only planned for Part A.
Maximum Serum Concentration (Cmax) of Pembrolizumab for Cycle 12: Part A
Cmax was the maximum observed concentration of pembrolizumab in serum. Blood sampling was taken for Part A on Day 1 of Cycle 12 at pre-dose and 0-30 minutes post-dose. Cycle 12 length for Part A was 14 days. Cmax is reported as geometric mean with a percent coefficient of variation (%CV). Per protocol, analysis for Cmax in Cycle 12 was only planned for Part A.
Maximum Serum Concentration (Cmax) of Pembrolizumab for Cycle 14: Part A
Cmax was the maximum observed concentration of pembrolizumab in serum. Blood sampling was taken for Part A on Day 1 of Cycle 14 at pre-dose and 0-30 minutes post-dose. Cycle 14 length for Part A was 14 days. Cmax is reported as geometric mean with a percent coefficient of variation (%CV). Per protocol, analysis for Cmax in Cycle 14 was only planned for Part A.
Maximum Serum Concentration (Cmax) of Pembrolizumab for Cycle 16: Part A
Cmax was the maximum observed concentration of pembrolizumab in serum. Blood sampling was taken for Part A on Day 1 of Cycle 16 at pre-dose and 0-30 minutes post-dose. Cycle 16 length for Part A was 14 days. Cmax is reported as geometric mean with a percent coefficient of variation (%CV). Per protocol, analysis for Cmax in Cycle 16 was only planned for Part A.
Maximum Serum Concentration (Cmax) of Pembrolizumab for Cycle 18: Part A
Cmax was the maximum observed concentration of pembrolizumab in serum. Blood sampling was taken for Part A on Day 1 of Cycle 18 at pre-dose and 0-30 minutes post-dose. Cycle 18 length for Part A was 14 days. Cmax is reported as geometric mean with a percent coefficient of variation (%CV). Per protocol, analysis for Cmax in Cycle 18 was only planned for Part A.
Time to Maximum Serum Concentration (Tmax) of Pembrolizumab for Cycle 1: Parts A, B, C, D, and E
Tmax was the time required to reach the maximum concentration of pembrolizumab in serum. For Part A, samples were collected on Day 1 at pre-dose, post-dose (to +30 min), 6 hour (hr) (±30 min), and 24hr; Days 2, 3, 8, 15, and 22 (±2 hr for Day 2 to Day 22) after completion of infusion. For Parts B, C, and E, samples were collected on Day 1 at pre-dose, post-dose (to +30 min), and 24hr; Day 5 (96hr was preferred, 72hr or 120hr were also acceptable, ±2 hr), and Day 15 (±24 hr) after completion of infusion. For Part D, samples were collected on Day 1 at pre-dose, post-dose (to +30 min), and 24hr; Day 5 (96hr was preferred, 72hr or 120hr were also acceptable, ±2 hr), Day 15, and Day 22 (±24 hr) after completion of infusion. Cycle 1 length for Part A was 28 days. Cycle 1 length for Parts B, C, and E was 21 days. Cycle 1 length for Part D was 42 days. Tmax is reported as median and full range. Per protocol, analysis for Tmax in Cycle 1 was planned for Parts A, B, C, D, and E.
Time to Maximum Serum Concentration (Tmax) of Pembrolizumab for Cycle 4: Part D
Tmax was the time required to reach the maximum concentration of pembrolizumab in serum. Blood sampling was taken for Part D on Day 22 of Cycle 4 at pre-dose (Day 1 of the following cycle prior to pembrolizumab infusion) and 0-30 minutes post-dose. Cycle length for Part D was 42 days. Tmax is reported as median and full range. Per protocol, analysis for Tmax in Cycle 4 was only planned for Part D.
Time to Maximum Serum Concentration (Tmax) of Pembrolizumab for Cycle 8: Parts B, C, and E
Tmax was the time required to reach the maximum concentration of pembrolizumab in serum. Blood sampling was taken for Parts B, C, and E on Day 1 of Cycle 8 at pre-dose and 0-30 minutes post-dose. Cycle 8 for Parts B, C, and E was 21 days. Tmax is reported as median and full range. Per protocol, analysis for Tmax in Cycle 8was planned for Parts B, C, and E.
Trough Concentration (Ctrough) of Pembrolizumab for Cycle 1: Parts A, B, C, D, and E
Ctrough was the lowest concentration of pembrolizumab in serum just before the next dose. Blood sampling for Cycle 1 Ctrough was taken for Parts A, B, C, D, and E on Day 1 of Cycle 2 at pre-dose (prior to Cycle 2 infusion). Cycle 1 length for Part A was 28 days. Cycle 1 length for Parts B, C, and E was 21 days. Cycle 1 length for Part D was 42 days. Ctrough is reported as geometric mean with a percent coefficient of variation (%CV). Per protocol, analysis for Cycle 1 Ctrough was planned for Parts A, B, C, D, and E.
Trough Concentration (Ctrough) of Pembrolizumab for Cycle 2: Part D
Ctrough was the lowest concentration of pembrolizumab in serum just before the next dose. Blood sampling for Cycle 2 Ctrough was taken for Part D on Day 22 of Cycle 2 at pre-dose (prior to Cycle 3 infusion). Cycle 2 length for Part D was 42 days. Ctrough is reported as geometric mean with a percent coefficient of variation (%CV). Per protocol, analysis for Cycle 2 Ctrough was only planned for Part D.
Trough Concentration (Ctrough) of Pembrolizumab for Cycle 3: Part D
Ctrough was the lowest concentration of pembrolizumab in serum just before the next dose. Blood sampling for Cycle 3 Ctrough was taken for Part D on Day 22 of Cycle 3 at pre-dose (prior to Cycle 4 infusion). Cycle 3 length for Part D was 42 days. Ctrough is reported as geometric mean with a percent coefficient of variation (%CV).
Trough Concentration (Ctrough) of Pembrolizumab for Cycle 3: Parts A, B, C, and E
Ctrough was the lowest concentration of pembrolizumab in serum just before the next dose. Blood sampling for Cycle 3 Ctrough was taken for Parts A, B, C, and E on Day 1 of Cycle 4 at pre-dose (prior to Cycle 4 infusion). Cycle 3 length for Part A was 14 days. Cycle 3 length for Parts B, C, and E was 21 days. Ctrough is reported as geometric mean with a percent coefficient of variation (%CV).
Trough Concentration (Ctrough) of Pembrolizumab for Cycle 4: Part D
Ctrough was the lowest concentration of pembrolizumab in serum just before the next dose. Blood sampling for Cycle 4 Ctrough was taken for Part D on Day 22 of Cycle 4 at pre-dose (prior to Cycle 5 infusion). Cycle 4 length for Part D was 42 days. Ctrough is reported as geometric mean with a percent coefficient of variation (%CV). Per protocol, analysis for Cycle 4 Ctrough was only planned for Part D.
Trough Concentration (Ctrough) of Pembrolizumab for Cycle 5: Parts A, B, C, and E
Ctrough was the lowest concentration of pembrolizumab in serum just before the next dose. Blood sampling for Cycle 5 Ctrough was taken for Parts A, B, C, and E on Day 1 of Cycle 6 at pre-dose (prior to Cycle 6 infusion). Cycle 5 length for Part A was 14 days. Cycle 5 length for Parts B, C, and E was 21 days. Ctrough is reported as geometric mean with a percent coefficient of variation (%CV). Per protocol, analysis for Cycle 5 Ctrough was only planned for Parts A, B, C, and E.
Trough Concentration (Ctrough) of Pembrolizumab for Cycle 6: Part D
Ctrough was the lowest concentration of pembrolizumab in serum just before the next dose. Blood sampling for Cycle 6 Ctrough was taken for Part D on Day 22 of Cycle 6 at pre-dose (prior to Cycle 7 infusion). Cycle 6 length for Part D was 42 days. Ctrough is reported as geometric mean with a percent coefficient of variation (%CV). Per protocol, analysis for Cycle 6 Ctrough was only planned for Part D.
Trough Concentration (Ctrough) of Pembrolizumab for Cycle 7: Parts A, B, C, and E
Ctrough was the lowest concentration of pembrolizumab in serum just before the next dose. Blood sampling for Cycle 7 Ctrough was taken for Parts A, B, C, and E on Day 1 of Cycle 8 at pre-dose (prior to Cycle 8 infusion). Cycle 7 length for Part A was 14 days. Cycle 7 length for Parts B, C, and E was 21 days. Ctrough is reported as geometric mean with a percent coefficient of variation (%CV). Per protocol, analysis for Cycle 7 Ctrough was only planned for Parts A, B, C, and E.
Trough Concentration (Ctrough) of Pembrolizumab for Cycle 8: Part D
Ctrough was the lowest concentration of pembrolizumab in serum just before the next dose. Blood sampling for Cycle 8 Ctrough was taken for Part D on Day 22 of Cycle 8 at pre-dose (prior to Cycle 9 infusion). Cycle 8 length for Part D was 42 days. Ctrough is reported as geometric mean with a percent coefficient of variation (%CV). Per protocol, analysis for Cycle 8 Ctrough was only planned for Part D.
Trough Concentration (Ctrough) of Pembrolizumab for Cycle 9: Part A
Ctrough was the lowest concentration of pembrolizumab in serum just before the next dose. Blood sampling for Cycle 9 Ctrough was taken for Part A on Day 1 of Cycle 10 at pre-dose (prior to Cycle 10 infusion). Cycle 9 length for Part A was 14 days. Ctrough is reported as geometric mean with a percent coefficient of variation (%CV). Per protocol, analysis for Cycle 9 Ctrough was only planned for Part A.
Trough Concentration (Ctrough) of Pembrolizumab for Cycle 10: Part D
Ctrough was the lowest concentration of pembrolizumab in serum just before the next dose. Blood sampling for Cycle 10 Ctrough was taken for Part D on Day 22 of Cycle 10 at pre-dose (prior to Cycle 11 infusion). Cycle 10 length for Part D was 42 days. Ctrough is reported as geometric mean with a percent coefficient of variation (%CV). Per protocol, analysis for Cycle 10 Ctrough was only planned for Part D.
Trough Concentration (Ctrough) of Pembrolizumab for Cycle 11: Parts A, B, C, and E
Ctrough was the lowest concentration of pembrolizumab in serum just before the next dose. Blood sampling for Cycle 11 Ctrough was taken for Parts A, B, C, and E on Day 1 of Cycle 12 at pre-dose (prior to Cycle 12 infusion). Cycle 11 length for Part A was 14 days. Cycle 11 length for Parts B, C, and E was 21 days. Ctrough is reported as geometric mean with a percent coefficient of variation (%CV). Per protocol, analysis for Cycle 11 Ctrough was only planned for Parts A, B, C, and E.
Trough Concentration (Ctrough) of Pembrolizumab for Cycle 12: Part D
Ctrough was the lowest concentration of pembrolizumab in serum just before the next dose. Blood sampling for Cycle 12 Ctrough was taken for Part D on Day 22 of Cycle 12 at pre-dose (prior to Cycle 13 infusion). Cycle 12 length for Part D was 42 days. Ctrough is reported as geometric mean with a percent coefficient of variation (%CV). Per protocol, analysis for Cycle 12 Ctrough was only planned for Part D.
Trough Concentration (Ctrough) of Pembrolizumab for Cycle 13: Part A
Ctrough was the lowest concentration of pembrolizumab in serum just before the next dose. Blood sampling for Cycle 13 Ctrough was taken for Part A on Day 1 of Cycle 14 at pre-dose (prior to Cycle 14 infusion). Cycle 13 length for Part A was 14 days. Ctrough is reported as geometric mean with a percent coefficient of variation (%CV). Per protocol, analysis for Cycle 13 Ctrough was only planned for Part A.
Trough Concentration (Ctrough) of Pembrolizumab for Cycle 14: Part D
Ctrough was the lowest concentration of pembrolizumab in serum just before the next dose. Blood sampling for Cycle 14 Ctrough was taken for Part D on Day 22 of Cycle 14 at pre-dose (prior to Cycle 15 infusion). Cycle 14 length for Part D was 42 days. Ctrough is reported as geometric mean with a percent coefficient of variation (%CV). Per protocol, analysis for Cycle 14 Ctrough was only planned for Part D.
Trough Concentration (Ctrough) of Pembrolizumab for Cycle 15: Parts A, B, C, and E
Ctrough was the lowest concentration of pembrolizumab in serum just before the next dose. Blood sampling was taken for Parts A, B, C, and E on Day 1 of Cycle 16 at pre-dose (prior to Cycle 16 infusion). Cycle 15 length for Part A was 14 days. Cycle 15 length for Parts B, C, and E was 21 days. Ctrough is reported as geometric mean with a percent coefficient of variation (%CV). Per protocol, analysis for Cycle 15 Ctrough was only planned for Parts A, B, C, and E.
Trough Concentration (Ctrough) of Pembrolizumab for Cycle 16: Part D
Ctrough was the lowest concentration of pembrolizumab in serum just before the next dose. Blood sampling for Cycle 16 Ctrough was taken for Part D on Day 22 of Cycle 16 at pre-dose (prior to Cycle 17 infusion). Cycle 16 length for Part D was 42 days. Ctrough is reported as geometric mean with a percent coefficient of variation (%CV). Per protocol, analysis for Cycle 16 Ctrough was only planned for Part D.
Trough Concentration (Ctrough) of Pembrolizumab for Cycle 17: Part A
Ctrough was the lowest concentration of pembrolizumab in serum just before the next dose. Blood sampling was taken for Part A on Day 1 of Cycle 18 at pre-dose (prior to Cycle 18 infusion). Cycle 17 length for Part A was 14 days. Ctrough is reported as geometric mean with a percent coefficient of variation (%CV). Per protocol, analysis for Cycle 17 Ctrough was planned for Part A.
Trough Concentration (Ctrough) of Pembrolizumab for Cycle 19: Parts B, C, and E
Ctrough was the lowest concentration of pembrolizumab in serum just before the next dose. Blood sampling was taken for Parts B, C, and E on Day 1 of Cycle 20 at pre-dose (prior to Cycle 20 infusion). Cycle 19 length for Parts B, C, and E was 21 days. Ctrough is reported as geometric mean with a percent coefficient of variation (%CV). Per protocol, analysis for Cycle 19 Ctrough was only planned for Parts B, C, and E.
Trough Concentration (Ctrough) of Pembrolizumab for Cycle 23: Parts B, C, and E
Ctrough was the lowest concentration of pembrolizumab in serum just before the next dose. Blood sampling was taken for Parts B, C, and E on Day 1 of Cycle 24 at pre-dose (prior to Cycle 24 infusion). Cycle 23 length for Parts B, C, and E was 21 days. Ctrough is reported as geometric mean with a percent coefficient of variation (%CV). Per protocol, analysis for Cycle 23 Ctrough was only planned for Parts B, C, and E.
Trough Concentration (Ctrough) of Pembrolizumab for Cycle 27: Parts B, C, and E
Ctrough was the lowest concentration of pembrolizumab in serum just before the next dose. Blood sampling was taken for Parts B, C, and E on Day 1 of Cycle 28 at pre-dose (prior to Cycle 28 infusion). Cycle 27 length for Parts B, C, and E was 21 days. Ctrough is reported as geometric mean with a percent coefficient of variation (%CV). Per protocol, analysis for Cycle 27 Ctrough was only planned for Parts B, C, and E.
Area Under the Concentration Time Curve From 0-28 Days (AUC 0-28) for Part A Cycle 1
AUC 0-28 was the AUC of pembrolizumab from time zero to 28 days after dosing. Blood sampling was taken at the following timepoints: Part A Cycle 1 Day 1 at pre-dose, 0-30 minutes post-dose, and at 6, 24, 48, 168, 336, 504 hours after completion of pembrolizumab infusion and Day 1 of Cycle 2 pre-dose. Cycle 1 length was 28 days. AUC 0-28 is reported as geometric mean with a percent coefficient of variation. Per protocol, analysis for AUC 0-28 was only planned for Part A Cycle 1.
Area Under the Concentration Time Curve From 0-Infinity (AUC 0-inf) for Part A Cycle 1
AUC 0-inf was the AUC of pembrolizumab from time zero to infinity after dosing. Blood sampling was taken at the following timepoints: Part A Cycle 1 Day 1 at pre-dose, 0-30 minutes post-dose, and at 6, 24, 48, 168, 336, 504 hours after completion of pembrolizumab infusion and Day 1 of Cycle 2 pre-dose. Cycle 1 length was 28 days. AUC 0-inf is reported as geometric mean with a percent coefficient of variation. Per protocol, analysis for AUC 0-inf was only planned for Part A Cycle 1.
Terminal Half-Life (t1/2) of Pembrolizumab Over Time for Part A Cycle 1
t1/2 was the time required to divide the pembrolizumab concentration by two after reaching pseudo-equilibrium. Blood sampling was taken at the following timepoints: Part A Cycle 1 Day 1 at pre-dose, 0-30 minutes post-dose, and at 6, 24, 48, 168, 336, 504 hours after completion of pembrolizumab infusion and pre-dose Day 1 of the following cycle prior to pembrolizumab infusion. Cycle 1 length A was 28 days. t1/2 is reported as geometric mean with a percent coefficient of variation. Per protocol, analysis for t1/2 was only planned for Part A Cycle 1.
Volume of Distribution (Vz) of Pembrolizumab Over Time for Part A Cycle 1
Vz was the volume of distribution during the terminal phase. Blood sampling was taken at the following timepoints: Part A Cycle 1 Day 1 at pre-dose, 0-30 minutes post-dose, and at 6, 24, 48, 168, 336, 504 hours after completion of pembrolizumab infusion and Day 1 of Cycle 2 prior to pembrolizumab infusion. Cycle 1 length A was 28 days. Vz is reported as geometric mean with a percent coefficient of variation. Per protocol, analysis for Vz was only planned for Part A Cycle 1.
Clearance (CL) of Pembrolizumab Over Time for Part A Cycle 1
CL was the volume of plasma from which pembrolizumab was eliminated per unit time. Blood sampling was taken at the following timepoints: Part A Cycle 1 Day 1 at pre-dose, 0-30 minutes post-dose, and at 6, 24, 48, 168, 336, 504 hours after completion of pembrolizumab infusion and Day 1 of Cycle 2 prior to pembrolizumab infusion. Cycle 1 length A was 28 days. CL is reported as geometric mean with a percent coefficient of variation. Per protocol, analysis for CL was only planned for Part A Cycle 1.