search
Back to results

The Efficacy and Safety of Magnesium Alloy Screw as a Novel Bioabsorbable Material in Patients Due to Hand Fractures

Primary Purpose

Hand Fractures

Status
Completed
Phase
Phase 2
Locations
Study Type
Interventional
Intervention
K-MET™ Bioresorbable Bone screw
Sponsored by
U&I Corporation
About
Eligibility
Locations
Arms
Outcomes
Full info

About this trial

This is an interventional treatment trial for Hand Fractures

Eligibility Criteria

20 Years - undefined (Adult, Older Adult)All SexesAccepts Healthy Volunteers

Inclusion Criteria:

  • Male or female patients aged 20 years or older
  • Patients who require internal fixation using screws in the hand
  • The clinical features of hand fractures are oblique and spiral fractures
  • Patients who voluntarily submitted a written informed consent and are willing to and able to follow the clinical study protocol.

Exclusion Criteria:

  • Infections around the fracture site or soft-tissue injury greater than Grade III
  • Fracture patterns such as open, transverse or comminuted fracture with greater than type II
  • Fractures that require the use of wires, pins or plates for fixation
  • Patients with re-fracture
  • Patients with critical systemic diseases
  • Patients with renal failure showing plasma creatinine level exceed 1.4 at the screening
  • Pregnant, lactating women
  • Patients who have a history of allergy to magnesium alloy
  • Patients with presence of past illness or taking a drug that may affect bone union
  • Patients who have participated in other clinical study and treated with medication or other medical device within past 3 months
  • Patients who are judged not to be appropriate for study enrollment in the opinion of the investigator

Sites / Locations

    Arms of the Study

    Arm 1

    Arm Type

    Experimental

    Arm Label

    K-MET™ Bioresorbable Bone screw

    Arm Description

    The K-MET™ Bioresorbable Bone Screw, intended to be used for trauma therapy, consists of Cortex screws, Cannulated headless screws. For Headless screw and Cannulated headless screws, the design is similar to normal headless compression screws but the compression function was achieved by using different lengths for the front and rear pitches. These screws are dynamic and allow therewith the fracture at the Carpal, metacarpal, and small hand bone.

    Outcomes

    Primary Outcome Measures

    Bone union
    Bone union was evaluated at 6-month after surgery according to the following definition.Definition of bone union is when simple X-ray findings reveal that bone trabeculae or cortical bone exceeds the fracture site. Non-union is defined as no union at 3-month post-surgery.

    Secondary Outcome Measures

    PROM(Passive Range of Motion)
    This Passive Range of Motion(PROM) is measured by goniometer and is compared with the value of the normal hand that did not undergo surgery.
    TAM(Total Active Motion)
    Total Active Motion(TAM) is measured by goniometer and is compared with the value of the normal hand that did not undergo surgery.
    Power(grip strength and pick-up power)
    The Power was measured using a dynamometer and pick-up counter and is compared with the value of the hand that did not undergo surgery.
    DASH scale
    This questionnaire evaluates the ability of the hand to perform certain activities before and after surgery. It was directly completed by subjects.
    Pain as measured by the NRS (1~10)
    The NRS (1~10) was used to measure the level of pain and was compared before and after surgery.

    Full Information

    First Posted
    May 15, 2015
    Last Updated
    September 14, 2015
    Sponsor
    U&I Corporation
    search

    1. Study Identification

    Unique Protocol Identification Number
    NCT02456415
    Brief Title
    The Efficacy and Safety of Magnesium Alloy Screw as a Novel Bioabsorbable Material in Patients Due to Hand Fractures
    Official Title
    A Prospective, Single Center, Single Group, Open-label Study to Evaluate the Efficacy and Safety of Magnesium Alloy Screw as a Novel Bioabsorbable Material in Patients Requiring Internal Fixation Due to Hand Fractures
    Study Type
    Interventional

    2. Study Status

    Record Verification Date
    May 2015
    Overall Recruitment Status
    Completed
    Study Start Date
    July 2013 (undefined)
    Primary Completion Date
    November 2014 (Actual)
    Study Completion Date
    December 2014 (Actual)

    3. Sponsor/Collaborators

    Responsible Party, by Official Title
    Sponsor
    Name of the Sponsor
    U&I Corporation

    4. Oversight

    Data Monitoring Committee
    Yes

    5. Study Description

    Brief Summary
    This study evaluates the safety and efficacy of biodegradable magnesium alloy screw, in patients with hand fractures who require internal fixation (to obtain a product license from the Ministry of Food and Drug Safety in Korea (MFDS)).
    Detailed Description
    Rationale: Hand fractures including intra- and extra-articular phalanges and metacarpal are common and account for approximately 40% of upper extremity fractures and lead to functional loss of the hand.Fractures can be treated conservatively with a nonsurgical approach(Closed reduction) by placing the damaged figure in a splint; this may results in displacement, rotation, angulation and/or instability, therefore require surgery. Surgical techniques for treatment of hand fractures include internal fixation with metal plate or screws after Open reduction and external fixation with insertion of percutaneous pins or screws. Percutaneous external fixation is one of the widely used methods, but is difficult to maintained when accompanied by unstable fractures and soft tissue injuries or there are severely comminuted fractures and sometimes results in restricted motion of adjacent joints due to prolonged fixation. In comparison, internal fixation is an operation using internal fixators such as plates, wires, screws etc. solely or concurrently depending on the location and severity of hand fracture. With the recent advancement of implant design and fixation techniques, a variety of screws are widely used for fixation of small-bone fractures. The present study was designed to evaluate the efficacy and safety of magnesium alloy screw as a novel bioabsorbable and biodegradable material. Study Duration: After an approval of clinical protocol from MFDS in Korea, total 20 months were required including 14 months for subject enrollment and 6 months of follow-up. An additional 1 month was required after completion of the study for handling of data, statistical analysis and preparation of study report. Target Subjects: Patients who require internal fixation using screws due to hand fractures Investigational Device: K-MET™ Bioresorbable Bone screw (manufactured by U&I) This device divided into two type,Cortex screw and Headless compression screw. Number of Subjects: A total of 34 cases of bone fractures in 28 subjects.

    6. Conditions and Keywords

    Primary Disease or Condition Being Studied in the Trial, or the Focus of the Study
    Hand Fractures

    7. Study Design

    Primary Purpose
    Treatment
    Study Phase
    Phase 2
    Interventional Study Model
    Single Group Assignment
    Masking
    None (Open Label)
    Allocation
    N/A
    Enrollment
    28 (Actual)

    8. Arms, Groups, and Interventions

    Arm Title
    K-MET™ Bioresorbable Bone screw
    Arm Type
    Experimental
    Arm Description
    The K-MET™ Bioresorbable Bone Screw, intended to be used for trauma therapy, consists of Cortex screws, Cannulated headless screws. For Headless screw and Cannulated headless screws, the design is similar to normal headless compression screws but the compression function was achieved by using different lengths for the front and rear pitches. These screws are dynamic and allow therewith the fracture at the Carpal, metacarpal, and small hand bone.
    Intervention Type
    Device
    Intervention Name(s)
    K-MET™ Bioresorbable Bone screw
    Intervention Description
    The biodegradable screw inserted into bone with an appropriate driver is slowly degraded and is completely degraded after completion of bone union and absorbed into the body. The screw is indicated for fixing damaged bone.
    Primary Outcome Measure Information:
    Title
    Bone union
    Description
    Bone union was evaluated at 6-month after surgery according to the following definition.Definition of bone union is when simple X-ray findings reveal that bone trabeculae or cortical bone exceeds the fracture site. Non-union is defined as no union at 3-month post-surgery.
    Time Frame
    up to 6 months
    Secondary Outcome Measure Information:
    Title
    PROM(Passive Range of Motion)
    Description
    This Passive Range of Motion(PROM) is measured by goniometer and is compared with the value of the normal hand that did not undergo surgery.
    Time Frame
    up to 6 months
    Title
    TAM(Total Active Motion)
    Description
    Total Active Motion(TAM) is measured by goniometer and is compared with the value of the normal hand that did not undergo surgery.
    Time Frame
    up to 6 months
    Title
    Power(grip strength and pick-up power)
    Description
    The Power was measured using a dynamometer and pick-up counter and is compared with the value of the hand that did not undergo surgery.
    Time Frame
    up to 6 months
    Title
    DASH scale
    Description
    This questionnaire evaluates the ability of the hand to perform certain activities before and after surgery. It was directly completed by subjects.
    Time Frame
    3,6 months
    Title
    Pain as measured by the NRS (1~10)
    Description
    The NRS (1~10) was used to measure the level of pain and was compared before and after surgery.
    Time Frame
    up to 6 months

    10. Eligibility

    Sex
    All
    Minimum Age & Unit of Time
    20 Years
    Accepts Healthy Volunteers
    Accepts Healthy Volunteers
    Eligibility Criteria
    Inclusion Criteria: Male or female patients aged 20 years or older Patients who require internal fixation using screws in the hand The clinical features of hand fractures are oblique and spiral fractures Patients who voluntarily submitted a written informed consent and are willing to and able to follow the clinical study protocol. Exclusion Criteria: Infections around the fracture site or soft-tissue injury greater than Grade III Fracture patterns such as open, transverse or comminuted fracture with greater than type II Fractures that require the use of wires, pins or plates for fixation Patients with re-fracture Patients with critical systemic diseases Patients with renal failure showing plasma creatinine level exceed 1.4 at the screening Pregnant, lactating women Patients who have a history of allergy to magnesium alloy Patients with presence of past illness or taking a drug that may affect bone union Patients who have participated in other clinical study and treated with medication or other medical device within past 3 months Patients who are judged not to be appropriate for study enrollment in the opinion of the investigator
    Overall Study Officials:
    First Name & Middle Initial & Last Name & Degree
    Gyeong-jin Han, professor
    Organizational Affiliation
    Ajou Univ hospital
    Official's Role
    Principal Investigator

    12. IPD Sharing Statement

    Learn more about this trial

    The Efficacy and Safety of Magnesium Alloy Screw as a Novel Bioabsorbable Material in Patients Due to Hand Fractures

    We'll reach out to this number within 24 hrs