Active clinical trials for "Mouth, Edentulous"

Dental implant supported screwed prosthetic rehabilitations are associated to several advantages, as a minimal occlusal spaced and easier hygiene and maintenance. In this sense, screwed rehabilitations have been associated with lower frequency of biological and technical complications. Nevertheless, the screwing process results in the formation of a prosthetic chimney that requieres an appropriate sealing protocol. This protocol needs to include a material for the protection of the screw head. Nowadays, there is a lack of materials for this intended use with marketing authorisation. Several materials have been tested in the bibliography including PTFE, although there are not high quality studies. In this context, this clinical investigation aims to evaluate the efficacy and safety os a PTFE-based product (MAFILL) for the sealing of prosthetic chimneys and the protection of the screw head.

Dental implants are used for replacing missing teeth. Placing dental implants is limited by the presence of adequate bone volume permitting their anchorage. In order to solve this problem several bone augmentation procedures have been developed. In principle the missing bone is taken from a donor site (for example the hip), transplanted where needed and then implants are placed. Sometimes, major bone grafting operations have to be undertaken under general anaesthesia requiring patients to be hospitalised for a few days. Some degree of morbidity related to the donor site must be expected, though more recently bone substitutes are used to minimize morbidity, and 2 to 3 surgical interventions may be needed before the implants can be functionally used. Sometimes patients have to wait more than 1 year before a prosthesis can be fixed to the implants and the total cost of the treatment is high. At the beginning of the 1990s a long screwshaped implant was developed by Professor PI Brånemark as an alternative to bone augmentation procedures: the zygomatic implant. Zygomatic implants are generally inserted through the palate to engage the body of the cheek bone. One to three zygomatic implants can be inserted through the posterior palate to engage the body of each cheek bone. The potential main advantages of zygomatic implants could be that bone grafting may not be needed and a fixed prosthesis could be fitted the same day of their placement. Despite that zygomatic implants have been used for more than 20 years, their effectiveness has never been compared with conventional dental implants in augmented maxillae. The aim of the project is to compare the longtermclinical outcome of fullarch upper jaw bridges supported by zygomatic implants versus conventional implants placed in augmented bone in the palate.

The purpose of this study is to evaluate the INFUSE® Bone Graft as an alternative to autograft for bone formation in the back of the mandible (lower jaw) prior to placing dental implants.

Study hypothesis: that there would be no difference in patient satisfaction among institutionalised older people before and after treatment with a mandibular single implant-retained overdenture. In a preliminary phase, a new denture is made or the old denture is adapted to provide a well-fitting denture. Eight weeks after insertion of the new denture a single implant is placed in the centre of the mandibula. If the level of primary stability is sufficient to enable the implant to resist micromovement, the implant is immediately loaded . If not, the implant is loaded after 6 to 12 weeks. Primary stability is assessed by the final seating torque and by the clinician's interpretation and tactile sense of primary stability. Before, during and after the treatment patient satisfaction and clinical outcomes are evaluated by a 20 item questionnaire and a clinical examination.

The placement of implants in the symphyseal region is common, especially in the treatment of totally edentulous patients. Some implant surgical procedures may however be responsible for lesions of the vascular and nervous elements in the symphyseal region. The prevention of vascular and nervous accidents during or after implant surgery is based on the identification of vascular and nervous elements. Although the anatomy of the symphyseal region is rather well described in the literature, the data concerning totally edentulous patients remains fragmented. These suggest that tooth avulsion and bone resorption have an influence on the anatomy of the mandibular region, and of the vascular and nervous elements traveling in the anterior mandibular part. These modifications would be responsible for individual anatomical variations. In order to test this hypothesis, the investigator wish to evaluate the anatomical characteristics of the vascular and nervous elements located in the symphyseal region, retrospectively, of a totally edentulous population for which the anatomy was documented in a three-dimensional way from 2013 to 2021 before the placement of dental implants.

BACKGROUND: The fabrication of complete dentures traditionally involves a series of complex technical procedures. Those procedures include two impressions for each jaw, the registration of the relationship between the upper teeth and the patient's head and usually two appointments for tooth try-in. However, recent studies have questioned the real need for such complex procedures. Simplified methods could have similar results if compared with conventional ones, and dentures would be delivered faster and with lower costs. OBJECTIVES: This study aims to compare the effectiveness complete dentures fabricated with a simplified or conventional method. METHODS: Eighty edentulous patients who requested treatment by maxillary and mandibular complete denture in a public dental clinic inside the University of Sao Paulo - Ribeirão Preto Dental School will be randomly divided into two groups. Group S will receive new dentures fabricated by a simplified method, whereas Group C will received new dentures according to a conventional method. Participants will complete a questionnaire for denture satisfaction and the oral health-related quality of life, 3 and 6 months after treatment. At the same time, a specialist in dental prostheses will evaluate the quality of new dentures.

Implant retained overdentures are a cost-effective treatment for elderly patients suffering from complete tooth loss. Despite the high success rate of implants in the general population, older adults lacking all teeth are a challenging population for implant therapy, often presenting limited bone disponibility, narrow alveolar ridges, diminished bone density, scarce inserted gingiva and several co-morbidities.Thus, improving their possibility of success in implant therapy avoiding further surgical interventions is key. Platelet-rich fibrin (PRF) is a blood derivate that can be easily and economically obtained from patients and that has shown promise of reducing the complications and improving the success of implant therapy, nevertheless its benefits in patients receiving implant retained overdentures has not been stablished. It is possible that PRF can improve the results and diminish the complications of implant therapy in older adults. The investigation aims to demonstrate that the use of platelet-rich fibirn (PRF) is safe and beneficial for implant treatment in older adults suffering from complete tooth loss.

investigating the effect of glazing and polishing on the color difference between natural teeth and all ceramic crowns made from celtra press (zirconia reinforced lithium silicate ceramic).

AN OPEN 5-YEAR PROSPECTIVE, CLINICAL MULTI-CENTER STUDY on NobelProcera Implant Bar Titanium with Locator attachment and related Overdenture on 4 NobelReplace implants with conical connection (CC) in the mandible/maxilla.

A potential complicating factor affecting implants is crestal bone loss. The causes of crestal bone loss are attributed to several factors. Among those hypothesized, proof for one or another cause remains obscure. Clinical documentation suggests that implant design may be a key factor. While the evidence is inconclusive, various authors suggest that it is a result of a combination of effects including (1) limited drilling procedure and restricted second-stage surgery 2, (2) rough implant surface in crestal bone 3, (3) microthread design for implant stiffness 4, (4) loading along a conus versus a flat interface 5, and (5) the absence of a significant microgap 6. The practice of platform switching (e.g. placing a 4 mm diameter abutment on a 5 mm implant seating surface physically moves the inflammatory cell infiltrate zone away from the crestal bone). The growing body of anecdotal platform switch evidence supports this biological width hypothesis. Here the biological width refers to the height of the dento-gingival attachment apparatus around a normal tooth and is defined as the distance necessary for a healthy existence of bone and soft tissue from the most apical extent of a dental restoration. To formally test this hypothesis the current study has been designed. The Prevail implant has been made with an integrated medialized seating surface that establishes a platform switching function. This implant moves the implant/abutment interface away from the crestal bone and may therefore reduce the amount of bone loss observed in the standard (non-medialized) Osseotite implant design. The objective of this study is to evaluate crestal bone levels adjacent to the implant reference point from the time of implant placement to a period of two years after loading.